Call US! 1-800-237-8931 X74426 option # 2
	HS12 Blade Sever

There is an HS12 single processor blade to fit all budgets and performance requirements:

• The HS12 offers a choice of high-performance quad- and dual-core Xeon processors, as well as low-cost dual-core Core 2 Duo and single-core Celeron processors with 64-bit extensions,  1.86GHz to 2.83GHz clock rates, 1066MHz or 1333MHz front side bus, and 512KB to 12MB  (processor-specific) of integrated Level 2 cache, and 65W to 80W maximum power draw.

• Energy-efficient processors draw less power and produce less waste heat than high-voltage processors, thus helping to reduce data center energy costs. Dual-core Xeon and Core 2 Duo  processors use only 65W (32.5W per core). This is half the wattage consumed by older 130W processors. On a per-core basis, the quad-core processors are even more economical, consuming only 80W (20W per core. 

•  Up to 24GB of registered 667MHz PC2-5300 DDR2 error checking and correcting (ECC) system memory with optional Chipkill protection, using 6 DIMM slots.

• A choice of  hot-swap SAS or low-cost fixed SATA HDDs.  Up to two internal 2.5-inch hot-swap SAS or fixed SATA HDDs

• RAID-1 provided standard offers high-performance disk access for SAS HDDs.

• Two Gigabit Ethernet ports standard.

Up to 24GB of registered 667MHz PC2-5300 DDR2 error checking and correcting (ECC) system memory with optional Chipkill protection, using 6 DIMM slots.   Having 6 slots allows for less expensive memory configurations than a 4-slot server does. For example, to install 12GB of memory in the HS12 requires six inexpensive 2GB DIMMs; a 4-slot server would require two 2GB DIMMs and two expensive 4GB DIMMs.                                                                                                                                                                                  Back to Top

Up to two internal 2.5-inch hot-swap SAS or fixed SATA HDDs and access to terabytes of external IBM System Storageâ„¢ and IBM TotalStorageâ„¢ SAN and NAS storage devices.    2.5-inch drives consume approximately half the power of 3.5-inch drives, helping to save you power and cooling costs in the data center. • Two optional internal hot-swap 15.8GB or 31.4GB Solid State Drives in place of the HDDs, as either higher-reliability/higher-availability storage or as a boot-to-SAN drive.

PCI Express Expansion I/O Expansion Unit for 8028 and 8014 blades PCI EXPRESS I/O EXPANSION UNIT FOR BC 5557 43W4391 44599K Supports two PCI Express adapters per expansion unit option HS12 Interior View

Blade Server Expansion Cards  The HS12 blade server includes one x8 PCIe and one 133MHz PCI-X adapter slot on each blade. Either one SFF (small form factor) PCI-X expansion card or one SFF PCIe adapter, or two CFF (compact form factor) cards (one CFFv and one CFFh) can be installed in this blade.  (The CFFh card or the SFF PCIe card uses the high-speed expansion connector as a second I/O slot.)

Standard Warranty HS12 8028 -   3 years parts and labor Next business day

RTS service will assist with:

• installation, usage, and configuration questions;
• questions regarding IBM Supported Product publications;
• diagnostic information review to assist in isolation of a problem cause;
• code-related problem questions; and
• for known defects, available corrective service information and program fixes which you are entitled to receive.
• 1-year and/or 3-year agreements
• Unlimited calls and callers
• Support coverage hours:
• Critical problems (severity 1) -- 24x7 -- 24 hours a day, seven days a week, including national holidays.
•  Non-criitical problems (severity 2,3,4) -- 9x5 -- 8 a.m. to 5 p.m. in the local time zone where you receive the Service, Monday through Friday (excluding national holidays).
  
  Response time:
•  If not answered live, we will use commercially reasonable efforts to respond to your call within two hours.

                       Back to Top